Fischer Bolt Anchor FWA
by Fischer
KES 70
KES 80
KES 75
KES 125
KES 125
KES 145
KES 135
KES 330
KES 575
The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.
- The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
- The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
- Available with metric and imperial threads
| UPC | 45789 |
|---|---|
| Model Number | 45789 |
| Drill hole Diameter (mm) | 8 |
| Anchor Length (mm) | 80 |
| SKU | 45789 |
| UPC | 45790 |
|---|---|
| Model Number | 45790 |
| Drill hole Diameter (mm) | 8 |
| Anchor Length (mm) | 95 |
| SKU | 45790 |
| UPC | 45792 |
|---|---|
| Model Number | 45792 |
| Drill hole Diameter (mm) | 10 |
| Anchor Length (mm) | 80 |
| SKU | 45792 |
| UPC | 45646 |
|---|---|
| Model Number | 45646 |
| Drill hole Diameter (mm) | 10 |
| Anchor Length (mm) | 130 |
| SKU | 45646 |
| UPC | 45793 |
|---|---|
| Model Number | 45793 |
| Drill hole Diameter (mm) | 10 |
| Anchor Length (mm) | 95 |
| SKU | 45793 |
| UPC | 45648 |
|---|---|
| Model Number | 45648 |
| Drill hole Diameter (mm) | 12 |
| Anchor Length (mm) | 100 |
| SKU | 45648 |
| UPC | 45795 |
|---|---|
| Model Number | 45795 |
| Drill hole Diameter (mm) | 12 |
| Anchor Length (mm) | 120 |
| SKU | 45795 |
| UPC | 45798 |
|---|---|
| Model Number | 45798 |
| Drill hole Diameter (mm) | 16 |
| Anchor Length (mm) | 140 |
| SKU | 45798 |
| UPC | 45800 |
|---|---|
| Model Number | 45800 |
| Drill hole Diameter (mm) | 12 |
| Anchor Length (mm) | 160 |
| SKU | 45800 |
Reviews
Description
Applications
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Gates
- Façades
Building materials
- Concrete C20/25, non-cracked
